How to Fix Windows 10 Black Screen with Cursor after Login


Recently, a lot of users report that they get the Windows 10 black screen with cursor after login. If you also run into the black screen with cursor issue, here are some troubleshooting methods for you to fix it.

1. Update Display Driver to Fix Windows 10 Black Screen with Cursor after Login

In some cases, the Windows 10 black screen with cursor after login issue is related to the outdated display driver. To fix the problem, you shall update your display driver for Windows 10. You could use a reliable and easy-to-use driver update utility like Driver Talent to automatically download and install the latest display driver for you.

Click here to get Driver Talent directly. No viruses. No spyware.

Take the 3 easy steps to use Driver Talent to fix your Windows 10 black screen with cursor after login issue.

Step 1. Scan Your PC

Run Driver Talent. Click “Scan” to allow Driver Talent to identify all your outdated, corrupt or damaged drivers in seconds.

Step 2. Update Your Drivers

One-click “Update” to get the latest drivers. Click “Repair” to fix all the identified problematic drivers.

Step 3. Reboot Your PC

Make a PC reboot to make driver update take effect.

2. Disable Onboard Graphics Card to Resolve Windows 10 Black Screen with Cursor

If your computer has an onboard graphics card and a dedicated graphics card, the two graphics cards could cause a clash and then the Windows 10 black screen with cursor could take place. You need to disable the onboard graphics to fix it. Take these steps:

Step 1. Right-click the Start button and select Device Manager.

See Also: Device Manager

Step 2. Expand Display adapters.

Step 3. Locate the onboard graphics card and right-click on it and then select Disable.

Step 4. Restart your PC.

3. Adjust Display Brightness to Fix Windows 10 Black Screen with Cursor after Login

If the Windows 10 black screen with cursor after login issue occurs after you connect an AC adapter, it is a problem of display brightness. You could do the following steps:

Step 1. Press Windows Key + X and type Power Options. Choose Power Options.

Step 2. When the Power Options window opens, locate your current plan and click Change plan settings.

Step 3. Click Change advanced power settings.

Step 4. Locate Display brightness setting and make sure that you set display brightness to 99%.

Note: Set display brightness to 100% could cause the Windows 10 black screen with cursor problem.

Step 5.Click Save and reboot your PC.

If you discover additional methods to fix the Windows 10 black screen with cursor issue, welcome to share with us in the Comments section below.

You may also like to check out:
How to Tell If Your Computer Has Bluetooth
How to Determine If Windows 10 Is 32-bit or 64-bit
How to Remove Test Mode Watermark in Windows 10
How to Enter Safe Mode in Windows 10, 8.1, 8, 7, Vista, XP
How to Enable or Disable Game Mode in Windows 10

  • Do also consider removing a few of your latest updates as they could also be the reason for this problem. If they aren’t, you can just install them again.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.