How to Fix Boot Error 0xc000000f in Windows 10
The boot error 0xC000000f in Windows 10 occurs when Windows attempts to read the Boot Configuration Data. Here are some ways to fix the boot error 0xC000000f in Windows 10.

1. Remove Peripheral Hardware Device
The peripheral damaged hardware could lead to the error 0xc000000f in Windows 10. To get rid of the error, you could remove the peripheral hardware device. Take these steps:
Step 1. Remove all peripheral hardware devices attached to your computer (except the keyboard and mouse).
Step 2. Remove any CD, USB and DVDs from their respective ports.
Step 3. Restart your computer to see if the computer starts normally.
2. Use bootrec.exe Tool to Fix Error 0xC000000f
In order to fix the boot error 0xC000000F in Windows 10, you can also use the built-in bootrec.exe tool. Please note that a bootable Windows Installation DVD or USB is required. The goal is to rebuild the Boot Configuration Data (BCD) that controls how Windows 10 is started.
Step 1. Reboot your computer.
Step 2. Insert the bootable DVD or USB installation disk.
Step 3. Reboot your computer again and press “R.”
Step 4. Click “Troubleshoot.”
Step 5. Click “Command Prompt.”
Step 6. Type “bootrec /fixmbr” and press Enter.
Step 7. Type “bootrec /fixboot” and press Enter.
Step 8. Type “bootrec /rebuildbcd” and press Enter.
If you know other methods to fix the boot error 0xC000000F in Windows 10, welcome to share with us in the comments section below.
You may also like to check out:
- Top 3 Ways to Fix Touchpad Not Working in Windows 10, 8.1, 8, 7
- How to Factory Reset a Windows 10 Laptop or Desktop
- How to Fix USB Tethering Not Working in Windows 10, 8.1, 8, 7
- AMD Graphics Driver Download and Update for Windows 10, 8.1, 8, 7
- Prolific USB to Serial Driver Download and Update for Windows 10, 8.1, 8, 7
- How to Delete $GetCurrent and $SysReset Folders in Windows 10
first, get the commands right with bootrec, there is a space after bootrec so its
“bootrec /fixmbr”
“bootrec /fixboot”
“bootrec /rebuildbcd”
“bootrec /ScanOS” is useless, its does what rebuild does but without rebuilding the bcd, its a useless command, unless used for troubleshooting purposes, but for this, its useless.
Thanks so much for your kind advice. Good day!
Finally, I can solve boot error.
Hi Mano! Many thanks for posting your feedback.
Perform the system restore will sort out the issue.
Windows 10 Error code 0xc000000f could also be caused by a faulty primary hard disk drive. Your primary hard disk drive may have a bad sector which could have hit the Windows 10 critical system files.
Visit this URL for additional information about this error and how to perform other methods and solutions.
https://www.errorsolutions.tech/error/windows-error-code-0xc000000f/